Lowrance GlobalMap 5200C GPS, Operation Instructions Manual

Page: 105 / 164

99
Sounds command, left. At right, the Sounds menu.
Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press
ENT
to
check it (turn on) and uncheck it (turn off.) After the option is set, press
EXIT
|
EXIT
to return to the page display.
To set Alarm Sounds: Press ↓ to
A
LARM
S
OUNDS
.
With the option high-
lighted, press
ENT
to check it (turn on) and uncheck it (turn off.) After
the option is set, press
EXIT
|
EXIT
to return to the page display.
To set Alarm Volume: Press ↓ to
V
OLUME
. Press → or ← to move the
bar. The left end of the scale is low volume; the right end is high volume.
After the option is set, press
EXIT
|
EXIT
to return to the page display.
To set Alarm Style: Press ↓ to
A
LARM
S
TYLE
|
ENT
. Press ↑ or ↓ to
change the style, then press
ENT
. After the option is set, press
EXIT
|
EXIT
to return to the page display.
Track Smoothing
This is a factory setting on the GPS Setup menu that should always be
left on . When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails, the steering
arrow, compass rose and a map in track-up mode.
Trail Options
There are several options you can use with trails. Some affect all trails;
other options can be applied to a particular trail. You can change the
way trails are updated, display or hide trails, create a new trail, delete
a trail, etc.
General Trail Options
To access the Trails Menu:
1. Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de