![Lowrance GlobalMap 3200 Operation Instructions Manual Download Page 76](http://html.mh-extra.com/html/lowrance/globalmap-3200/globalmap-3200_operation-instructions-manual_1942888076.webp)
70
Menus for changing Com Port settings.
For connectors and wiring information for another device, see page 13.
For assistance in configuring the GlobalMap 3200 to communicate with
another device, consult the factory; customer service phone numbers
are in the back of this manual. Also see the entries below for
Configure
DGPS
and
Configure NMEA
. To set Com Port Configuration:
1. Press
MENU
|
MENU
|
↓
to
S
YSTEM
S
ETUP
|
ENT
.
2. Press
↓
to
C
OMMUNICATIONS
P
ORT
|
ENT
.
Configure DGPS
This unit will recognize Starlink
, Magnavox
and Lowrance DGPS
receivers.
1. Press
MENU
|
MENU
|
↓
to
S
YSTEM
S
ETUP
|
ENT
.
2. Press
↓
to
C
OMMUNICATIONS
P
ORT
|
ENT
.
A. If you have a Magnavox receiver, press
↓
to
M
AGNAVOX
|
ENT
.
B. If you have a Lowrance or Starlink receiver, press
↓
to
S
TARLINK
|
ENT
.
C. If you have a Magnavox or Starlink, press
EXIT
|
EXIT
|
EXIT
. This is
the only setup necessary. If you have a Lowrance receiver or another
Magnavox- or Starlink- compatible brand, continue with these steps:
3. Press
↓
to
C
ONFIGURE
NMEA
|
→
to
C
ONFIGURE
DGPS
|
ENT
.
4. Press
ENT
, then use
↑
↓
→
←
to enter the station frequency, then
press
ENT
.
5. Press
→
to
B
IT
R
ATE
|
ENT
then use
↑
↓
to select the station bit rate,
then press
ENT
.
6. A. If you are
not
using a Starlink DGPS receiver, press
EXIT
|
EXIT
|
EXIT
|
EXIT
to return to the previous page.
B. If you
are
using a Starlink DGPS receiver, press
↓
to
S
TARLINK
A
UTO
T
UNING
M
ODE
|press
ENT
|press
EXIT
|
EXIT
|
EXIT
|
EXIT
to return to the pre-
vious page.
Summary of Contents for GlobalMap 3200
