manualshive.com logo in svg

Lowrance GlobalMap 3200, Operation Instructions Manual

Share
Download
Lowrance GlobalMap 3200 Operation Instructions Manual Download Page 22

16

Some customers, however, prefer to mount the bracket to the side of the
cable hole — it's a matter of personal preference.

Front view (left) and side view (right) showing dimensions of the

GlobalMap 3200 when mounted on gimbal bracket.

After drilling the hole, pass the antenna connector 

up

 through the hole

from under the dash. Pass the power cable's bare-wire end 

down

though the hole from the top.

If you wish, you can fill in the hole around the cables with a good marine
caulking compound. (Some marine dealers stock cable hole covers to con-
ceal the opening.) No matter what type of installation you prefer, be sure
to leave enough slack in the cables to allow tilting or swiveling the
GlobalMap 3200. If you choose to fill in the hole, be sure to position the
cables against the rear edge of the hole as you apply the fill material.

Before positioning the bracket, be sure to hold the cables against the
rear edge of the hole. Then, slide the bracket over the hole and butt the
rear of the bracket base firmly against the cables, thus pinning them in
place against the side of the hole. Finally, fasten the bracket to the
dash. Attach the unit to the gimbal bracket using the supplied gimbal
knobs and washers.

Millimeter

[Inch]

 23.4
 [0.92]

 72.9
 [2.87]

 137.9
 [5.43]

 56.9
 [2.24]

 157.9
 [6.22]

Summary of Contents for GlobalMap 3200

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands