Lowrance GlobalMap 3200 Operation Instructions Manual Download Page 114

Page: 114 / 128

108

To find

the waypoint, press

↓

IND

ENT

. The Map Page ap-

pears with the cursor highlighting the found waypoint.

Waypoint Information screens with the Go To Waypoint command se-

lected, left, and the Find on Map command selected, right.

To clear these menus and return to the previous page, press

EXIT

re-

peatedly.

If you're looking

by name

, there are two options:

You can

spell

out

the name in the top selection box. Press

↑

↓

to change the first

letter, then press

→

to move the cursor to the next letter and repeat

until the name is correct, then press

ENT

Or you can jump

down to the lower selection list by pressing

ENT

, then press

↓

↑

select a waypoint from the list, then press

ENT

. The waypoint informa-

tion screen appears.

Find By Name menu, left. Waypoint Information screen, center. At right,

the found waypoint is highlighted by the cursor on the Map Page.

To navigate

to the waypoint, press

ENT

. (Go To Waypoint com-

mand is already highlighted.) The GlobalMap 3200 will show navi-
gation information to the waypoint.

To find

the waypoint, press

↓

IND

ENT

. The Map Page ap-

pears with the cursor highlighting the found waypoint.

To clear these menus and return to the previous page, press

EXIT

re-

peatedly.

Summary of Contents for GlobalMap 3200
































































































































Search results

Summary of Contents for GlobalMap 3200

Reviews:

Related manuals for GlobalMap 3200

Brands by name

Popular brands

Lowrance GlobalMap 3200, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 3200

Reviews:

Related manuals for GlobalMap 3200

Brands by name

Popular brands