manualshive.com logo in svg

Lowrance GlobalMap 3200, Operation Instructions Manual

Share
Download
Lowrance GlobalMap 3200 Operation Instructions Manual Download Page 24

18

Install batteries in power pack battery adapter.

MMC or SDC Memory Card Installation

Your GlobalMap 3200 uses a MultiMedia Card to store information,
such as custom maps, waypoints, trails and other GPS data. The unit
can also use Secure Digital Cards (SD card or SDC) to store data.

NOTE:

Throughout this manual, we will use the term MMC, but just re-
member that your unit can use an MMC 

or

 SDC to store data.

Both of these solid-state flash memory devices are about the size of a
postage  stamp.  An  SD  card  is  slightly thicker than an MMC. As this
manual went to press, MMCs were available in storage capacities of 8
MB, 16 MB, 32 MB and 64 MB. SD cards were available in capacities of
8 MB, 16 MB, 32 MB, 64 MB and 128 MB.

Additional MMC cards are available from LEI Extras; see ordering in-
formation inside the back cover of this manual. MMCs and SD cards
are also available at many camera and consumer electronics stores.

The MMC slot is located in a compartment on the front of the case. The
compartment door is located at the lower right corner. The following
figure shows a close-up with the door opened.

"D" cell battery

Summary of Contents for GlobalMap 3200

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands