50
To transfer data
from
the MMC
to
the GlobalMap 3200
: press
→
to
L
OAD
|
ENT
.
3.
Saving to MMC
: To accept the default name "Data" for the GPS
Data File, press
↓
to
S
AVE
D
ATA
|
ENT
. If you wish to rename the file (as
shown in the following figures), press
ENT
to activate the selection box.
Press
↑
or
↓
to change the first character, then press
→
to the next
character and repeat until the name is correct. Then, press
ENT
|
↓
to
S
AVE
D
ATA
|
ENT
.
The GlobalMap 3200 will display first a progress then a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
EXIT
.
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from the GlobalMap 3200's memory to an
MMC.
4.
Loading to unit memory
: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT
to activate the selec-
tion box, use
↓
or
↑
to highlight the file, then press
ENT
to accept the
selection. Next, press
↓
to
L
OAD
|
ENT
. The GlobalMap 3200 will display
a completion message when the data transfer is finished. To return to
the Page view, press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Summary of Contents for GlobalMap 3200
