Lowrance GlobalMap 3200 Operation Instructions Manual Download Page 32 | Manualshive

Page: 32 / 128

background image

26

The navigation screen looks like the one below when you're

not

navi-

gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history, or
path you've just taken, is depicted by the line extending from the arrow.
The arrow pointing down at the top of the compass rose indicates the cur-
rent track (direction of travel) you are taking.

Navigation Page, recording a trail, traveling southwest. Page looks

like this when the unit is not navigating to a waypoint , following a

route, or backtracking a trail.

When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint, and course are all shown digitally on this screen.

NOTE:

Remember, when the Speed, Track and Position information dis-
plays are flashing, satellite lock has not been achieved and no posi-
tion fix has been determined. A question mark will also flash on the
present position arrow in the center of the compass rose.

Speed (ground speed) is the velocity you are making over the ground. (If
you wish, you can customize the Speed window to display Closing
Speed instead. Closing Speed is also known as velocity made good. It's
the speed that you're making toward the waypoint. For instructions,
see the Customize Page Displays entry in Sec. 5.)

Track is the heading, or the current direction you are actually travel-
ing. Bearing is the direction of a line-of-sight from your present position

Compass

rose

Navigation
information
displays

Present

position

arrow

Trail line

Track or compass heading indicator, showing direction of travel

«
...
30
31
32
33
34
...
»

Summary of Contents for GlobalMap 3200

































































































































Reviews:

No comments

Related manuals for GlobalMap 3200

Amber Insight T251

Brand: amber connect Pages: 8

Brand: Cal Amp Pages: 66

Brand: Garmin Pages: 82

Brand: Winter Pages: 2

Raytheon NAV 398

Brand: Raymarine Pages: 5

Brand: Jensen Pages: 89

Brand: Raymarine Pages: 127

Brand: T-Mark Pages: 8

Personal Navigator GPS 100AVD

Brand: Garmin Pages: 27

Brand: Leica Geosystems Pages: 22

iP4700 - PIXMA Color Inkjet Printer

Brand: Canon Pages: 437

iP4700 - PIXMA Color Inkjet Printer

Brand: Canon Pages: 24

Geosat 6 Series

Brand: AvMap Pages: 120

Brand: VDO Pages: 50

Brand: Americaloc Pages: 2

Brand: Americaloc Pages: 5

Brand: Four-Faith Pages: 46

Brand: Teltonica Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands