Lowrance ELITE TI Operator'S Manual Download

Page: 41 / 130

Raster imagery

High resolution bathymetry

Shaded relief

Shades seabed terrain.

No contours

Removes contour lines from the chart.

Raster charts

Changes the view to that of a traditional paper chart.

Raster transparency

Controls the transparency of raster imagery.

High resolution bathymetry

Enables and disables higher concentration of contour lines.

Jeppesen view options
Chart detail

•

Full

All available information for the chart in use.

•

Medium

Minimum information sufficient for navigation.

•

Low

Basic level of information that cannot be removed, and includes
information that is required in all geographic areas. It is not
intended to be sufficient for safe navigation.

Jeppesen chart categories

Jeppesen charts include several categories and sub-categories that
you can turn on/off individually depending on which information
you want to see.

Charts

| ELITE Ti Operator Manual

Summary of Contents for ELITE TI



































































































































Search results

Summary of Contents for ELITE TI

Reviews:

Related manuals for ELITE TI

Brands by name

Popular brands

Lowrance ELITE TI, Operator'S Manual

Search results

Summary of Contents for ELITE TI

Reviews:

Related manuals for ELITE TI

Brands by name

Popular brands