20
Operating gas time
–
The absolute and partial hours of gas mode operating are visualized. The
counter of partial hours can be erased by the user after a maintenance
Operating petrol time
–
The absolute hours of petrol mode operating are visualized
Forsed gas star
–
The number of forced gas start is visualized. If you use ten time forced gas
start, if you use fi ve time forced gas start, this function is unable to be used in order to safeguard
the car’s carburation. Only with a PC you can reset the counter for enable again this function.
8.6 DISPLAY.
This page shows all signals managed by the control unit.
10
11
9
8
7
6
4
2
12
5
3
1
1) This shows the number of engine revolutions in real time (rpm);
2) This shows the gas temperature (expressed in °C);
3) This shows the gas pressure present in the fi lter (bar);
4) This shows the gas injection time in real time (ms);
5) This shows the petrol injection time in real time (ms);
6) This shows the level of gas present in the tank;
7)
This allows the switching from petrol to gas by computer;
8)
This indicates whether the car is working in gas or petrol mode;
9)
This supplies useful hints on the correct dimensioning of the nozzles installed on the gas injec-
tors;
10) This supplies a visual indication on some operation statuses of the car and of the plant with gas
CUT-OFF, extra-injections, diagnostics or to enable the acquisition function.
11) This allows returning to the main menu.
12) This shows the presence or not of the key-on signal. A red cross will apear over the key if the
signal is not present.
