![background image](http://html1.mh-extra.com/html/toro/127-7377/127-7377_installation-instructions_1134423001.webp)
Form No. 3382-204 Rev A
Splash Guard Kit
2010 and After Workman
®
MD or MDX Utility Vehicle
Model No. 127-7377
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Installing the Air-cleaner
Shield
1.
Using the air-cleaner shield as the template, drill 3 holes
(4.8 mm (3/16 inch) in diameter) into the engine tray
(Figure 1).
Figure 1
1.
Engine tray
2.
Air-cleaner shield
2.
Align the air-cleaner shield with the 3 holes in the
engine tray.
3.
Secure the air-cleaner shield to the engine tray with 3
tek screws (1/4 inch) as shown in Figure 2.
Figure 2
1.
Engine tray
3.
Tek screws (1/4 inch)
2.
Air-cleaner shield
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3382-204* A