Instruction manual for installation, maintenance and use
Gas Kettles PMR.G…A
- GB -
Page
8 di 26
Table 6 – Gas inlet pressure
Gas family 2 – Natural
20 mbar
Table 6a
Nominal main pressure
for the different
types of gas
Gas family 3 –LPG
28-30/36 mbar
Gas family 2 – Natural
da 16 a 25 mbar
Table 6b
Operation permissible
if pressure is in the
range:
Gas family 3 –LPG
da 20/25 a 35/45 mbar
Gas family 2 – Natural
16 mbar
Table 6c
Operation non permissible
if pressure is
lower
than:
Gas family 3 –LPG
20/25 mbar
Gas family 2 – Natural
25 mbar
Table 6d
Operation non permissible
if pressure is
higher
than:
Gas family 3 –LPG
35/45mbar
1.3. CONSTRUCTION
−
Main structure in steel with 4 adjustable height feet.
−
Panels in stainless steel AISI 304, thickness 15-20/10.
−
Cooking vat in stainless steel AISI 316, thickness 20/10.
−
Double wall lid in stainless steel, hinged and spring balanced in all opening positions.
−
Chrome-plated brass drainage tap.
−
Vat heating controlled by means of high efficiency stainless steel tubular burners resistant to mechanical
and thermal stress.
−
The gas supplied to the burner is adjusted by a cock.
−
The appliance has a pilot burner with fixed injector, besides piezoelectric ignition.
−
The safety of the appliance is ensured by a thermocouple that cuts off the gas flow if the pilot burner
should turn off for any reason.
−
The hot/cold water connection is 10 mm. (Mod. 100/150lt.)
−
The hot/cold water connection is ½”. (mod. 200/300/500/170/270/370lt.)
−
The appliance is equipped with a mixer tap.
1.3.1. SPECIAL FEATURES FOR PRESSURE KETTLES
(MODELS PMR… A)
−
Stainless steel lid with heat-resistant silicone gasket.
−
Hermetically sealed with 4 screw clamps.
−
The relief valve for the pressure that develops in the cooking chamber is set at 0.05 bar.