37
Using the Main Menu
3
In the
Covert
drop-down menu, select
Enable
.
4
Click
Apply
to save your settings.
Configuring the Time and
Recording Time Display
To add/remove the time stamp in the
system display:
1
In the Show Time and Record Time
drop-down menus, select
Enable
or
Disable
.
2
Click
Apply
to save your settings.
Configuring Sequence Time
Sequence time refers to the amount of
time a channel appears on the screen
before changing to a different channel
when the DVR is in Sequence Mode. For
example, when Sequence Mode is on,
channel 1 is shown for several seconds
before switching to channel 2.
To configure the sequence time:
1
Click the
Output
tab.
2
Click the
SEQ Dwell Time
field and enter
the time channels remains on-screen
before changing to another channel.
3
Click
Apply
to save your settings.
Changing the Video-out Resolution
1
Click the
Output
tab.
2
Click the drop-down menu beside
VGA
Resolution
and select the output
resolution.
3
Click
Apply
to save your settings.
4
Right-click repeatedly to exit all menus.
The DVR prompts you to restart. Click
OK
.
5
The DVR restarts and asks you to confirm
the new resolution. Click
Yes
to confirm or
No
to revert to the old resolution. If you do
nothing, the DVR will revert to the last
selected resolution and restart.
Adjusting Menu Transparency
You can increase or decrease the
transparency of the on-screen menus.
To adjust the transparency of
on-screen menus:
1
Click the
Output
tab.
2
Drag the
Transparency
slider to adjust
transparency.
3
Click
Apply
to save your settings.
Restoring the System’s Resolution
if you see a Blank Screen
If you see a blank screen on your
monitor after turning on your system,
the DVR’s output resolution may be
higher than what your monitor
supports.
To restore the DVR to the default
resolution (1024 x 768):
• Press and hold the
Stop (
)
button on the
remote control for 6 seconds. The
resolution will be reset and the DVR will
restart.
SEQ Dwell time
.