7
Basic Setup
Step 4: Connect the Monitor
• Connect a VGA cable (not included) from the
VGA
port to the monitor.
OR
•
ECO B Series only:
connect the included HDMI cable from the
HDMI
port to your
HDTV or monitor.
Step 5: Connect the Power Adapter and Power on the DVR
• Connect the included power adapter to the
DC 12V
port. Connect the other end of the power
adapter to a wall socket or a surge protector.
•
16-channel models only:
Turn the power switch to
I
to turn on the DVR.
• At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view.
Step 6: Verify Camera Image
• Power on the cameras, and then verify the camera video quality before mounting the cameras
to a permanent location.
• Mount the cameras under a sheltered location. Always verify the outdoor rating of your camera
before installing it in a permanent location.
8-channel model shown
VGA
HDMI port (featured on
ECO B only)
16-channel ECO B shown
8-channel model shown
Connect power adapter
16-channel:
Connect
power adapter and turn on
power switch