Lorex N4K2-86BB User Manual Download Page 82

Page: 82 / 126

Using the Main Menu

2. Click

NETWORK

, then click the

Connection

tab on the side panel.

3. Configure the port numbers as needed.

4. Click

Apply

to save changes.

NOTE

Up to 3 devices may connect to the system at the same time.

17.6.3 Configuring Email Alerts

You can configure the system to send out email alerts for motion detection or other events.

NOTE

To send out motion detection alerts, you must enable the

Send Email

option for motion detection on each cam-

era you would to receive alerts from. For details, see 12

Motion Detection

, page 37.

To configure Email Alerts:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

NETWORK

, then click the

Email

tab on the side panel.

3. Check

Enable

to enable email notifications.

#LX400113; r. 9.0/57192/57197; en-US

Summary of Contents for N4K2-86BB































































































































Search results

Summary of Contents for N4K2-86BB

Reviews:

Related manuals for N4K2-86BB

Brands by name

Popular brands

Lorex N4K2-86BB, User Manual

Search results

Summary of Contents for N4K2-86BB

Reviews:

Related manuals for N4K2-86BB

Brands by name

Popular brands