3.1 Front Panel
1.
LED Indicators:
•
HDD:
Glows to indicate hard drive is operating properly. Turns off when there is a
hard drive error.
•
POWER:
Glows to indicate the system is on.
•
NETWORK:
Glows to indicate the recorder is connected to the Internet for remote
access and automatic firmware updates. Turns off when there is no Internet access.
2.
Info / Panic Button:
• From live view, press once to open the System Information screen.
• Press and hold for 3 seconds to activate the warning lights and sirens on all connected de-
terrence cameras.
3.
USB Port:
Connect a USB mouse (included) to control the system, or a USB flash drive
(not included) for data backup or manual firmware updates.
3.2 Back Panel
1.
DC 12V:
Connect the included power adapter.
2.
PoE Video Inputs:
Connect Lorex IP cameras to the system. For a full list of compatible
cameras, visit
3.
LAN:
Connect the included RJ45 Ethernet cable from the recorder to your router for remote
connectivity and automatic firmware updates.
4.
VGA:
Connect a VGA monitor (not included) to view the system interface.
5.
AUDIO IN/OUT:
• Connect an external microphone to the
AUDIO IN
port for single-channel audio
recording.
• Connect an external speaker to the
AUDIO OUT
port to hear system audio
• For full details on connecting external audio devices, see 21
page 98.
6.
HDMI:
Connect to an HDMI monitor or TV (not included) using the included HDMI cable
to view the system interface.
7.
USB Port:
Connect a USB mouse (included) to control the system, or a USB flash drive
(not included) for data backup or manual firmware updates.
#LX400113; r. 9.0/57192/57197; en-US
5
