Lorex N4K2-86BB User Manual Download Page 76

Page: 76 / 126

Using the Main Menu

The following alarms are shown in the Alarm Status menu:

•

Motion Detect:

Shows channels with active motion alarms.

•

Smart Motion:

Shows channels with active smart motion alarms.

To access Alarm Status:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

INFORMATION

, then click the

Alarm

tab on the side panel.

17.5.6 Online Users

View all users connected to the system using computers or mobile devices.

To access the online users menu:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

INFORMATON

, then click the

Network

tab on the side panel. Click the

Online

Users

tab on the top panel.

17.5.7 Network Load

View network traffic your system is sending and receiving.

#LX400113; r. 9.0/57192/57197; en-US

Summary of Contents for N4K2-86BB































































































































Search results

Summary of Contents for N4K2-86BB

Reviews:

Related manuals for N4K2-86BB

Brands by name

Popular brands

Lorex N4K2-86BB, User Manual

Search results

Summary of Contents for N4K2-86BB

Reviews:

Related manuals for N4K2-86BB

Brands by name

Popular brands