Settings
14
14.3.1
IP Addressing Options
CAUTION
This section is for advanced users only.
To enable dynamic IP addressing:
Note
Dynamic IP addressing is enabled by default.
1. Press
, then push the joystick to select
Settings
.
2. Select
Network
and push the joystick to confirm.
3. Select
Network Setting
.
4. Select
Dynamic IP
, then select
On
. Push the joystick to confirm.
5. Press
until all menus are closed.
To enable static IP addressing:
Note
•
A static IP address is not required for remote access to the system.
•
You may have to configure your router settings if the DHCP server is enabled.
1. Press
, then push the joystick to select
Settings
.
2. Select
Network
and push the joystick to confirm.
3. Select
Network Setting
.
4. Select
Static IP
.
5. Highlight the
IP Address
field and push the joystick. A cursor appears.
6. Move the joystick up / down to change values, and move the joystick left / right to move
the cursor.
7. Press
when finished.
8. Repeat the above process for the
Subnet Mask
and
Default Gateway
fields.
9. Select
OK
, then push the joystick to confirm.
10. Press
until all menus are closed.
#LX400011; r. 1.0/11916/13451; en-US
37
Summary of Contents for LW2750 Series
Page 1: ...USER S GUIDE LW2750 Series...
Page 2: ......
Page 3: ...USER S GUIDE LW2750 Series LX400011 r 1 0 11916 13451 en US iii...
Page 65: ......
