Lorex LH150 ECO4 SERIES, Instruction Manual

Page: 20 / 178

Rear Panel (LH150 Series) 5
2. Video Output : Outputs the DVR interface to a BNC connection. This allows you to see
your mouse cursor and have full control of the system on a secondary monitor. To
switch the mouse and system interface between BNC and VGA/HDMI monitors, press
0 three times on the remote control.
Note
Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3. Audio Input : Input for RCA audio-enabled cameras (not included).
4. VGA : Connect a VGA monitor (not included) to view the system interface.
5. RS485/Alarm Block : Connect compatible PTZ cameras (not included) or alarm sen-
sor devices (not included).
6. IR EXT: Service only; not supported.
7. On/Off Switch : Turns the DVR on or off.
8. DC12V : Connect the included AC power adapter.
9. USB Port : Connect a USB mouse (included) or USB flash drive (not included) for data
backup or firmware updates.
10. LAN : Connect a RJ45 Ethernet cable for local and remote connectivity.
11. HDMI : Connect to an HDMI monitor or TV (not included) to view the system interface.
12. Audio Output : Output for 1 RCA audio channel (e.g. speakers).
#LX400012; r. 2.0/12066/12066; en-US
10