Lorex LH150 ECO4 SERIES, Instruction Manual

Page: 146 / 178

Connecting a PTZ Camera (LH150 Series) 21
3. Configure the following according to your PTZ camera’s specifications:
• Channel : Select the channel the PTZ camera is connected to.
• Protocol : Select from Pelco-D or Pelco-P .
• Baud rate : Select the PTZ camera’s baud rate.
• Data Bit : Select from 5~8 data bits.
• Stop Bit : Select from 1 or 2 stop bits.
• Parity : Select from None, Odd, Even, Mark , or Space .
• Cruise : Select Enable to enable PTZ cruise.
• Address : Enter the PTZ camera’s address.
4. Click Apply to save your settings.
21.2 Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1. Select the channel that the PTZ camera is connected to.
2. Right-click and press the PTZ button ( ). Enter the system password. The PTZ
menu opens.
3. Use the on-screen PTZ controls to control the camera.
#LX400012; r. 2.0/12066/12066; en-US
136