Lorex L15LD400 series Instruction Manual Download Page 6

Page: 6 / 59

L15LD400 Series Feature List

L15LD400 Series

Feature List

Monitor

• 15" High Resolution LCD Monitor with built in DVR

• Mouse control interface (mouse included)

• Trilingual interface (English, Spanish and French)

• Supports DDNS (Dynamic Domain Name Server)

• Commercial grade monitor stand

• Wall or Rack mountable (mounts sold separately)

• A full range of LOREX Pro Series CCTV cameras available for use with this system

Built-In Digital Video Recorder (DVR)

• Triplex Technology allows for recording, playback or viewing simultaneously.

• Network Interface for remote viewing over the internet***

• MJPEG video compression

• USB (Device) port for Firmware Upgrade, Backup and Image Transfer

• HDD cradle - easy to remove/upgrade/archive

• 160GB HDD Designed for Surveillance: Hard Drive is specifically designed for optimal

performance in the commercial video security applications.

Cameras

• ¼'' Color CCD image sensor

• 12 IR LEDs provides effective night vision range of 30ft (10m).

• Day/Night mode: Picture automatically switches camera to B&W delivering better clarity in

low light conditions.

• Professional Grade Weather Resistant cameras*

• Versatile Camera stand allows the camera to be mounted on the Wall or Ceiling.

• Industry standard BNC connector.

• 4 in 1 power adaptor powers all four cameras from one power source

• 60ft extension cable included.

Summary of Contents for L15LD400 series




























































Search results

Summary of Contents for L15LD400 series

Reviews:

Related manuals for L15LD400 series

Brands by name

Popular brands

Lorex L15LD400 series, Instruction Manual

Search results

Summary of Contents for L15LD400 series

Reviews:

Related manuals for L15LD400 series

Brands by name

Popular brands