Lorex L15LD400 series Instruction Manual Download Page 10

Page: 10 / 59

L15LD400 Series - Front

L15LD400 Series - Front

DISPLAY CONTROL BUTTONS

- Control the onscreen display of Cameras:

•

SEQ

- Displays cameras 1~4 in Full Screen Sequencing Mode

•

PIP

- Displays cameras in Picture in Picture mode. The displayed cameras can be set by

selecting either the main screen or PIP screen, and selecting a number 1~4.

•

ZOOM

- Zooms in on the currently displayed camera (1x Zoom). Use the direction buttons or

mouse and move to the area to be enlarged.

•

P/T

- Enters PTZ (Pan / Tilt / Zoom) control mode. A PTZ type camera (not included) is required

to use the PTZ Functions.

MENU

- Enters the System Menu and Setup.

ESC

- Exits the System Menu and Setup.

+/ - BUTTONS -

Adjusts the System Menu and Setup values.

LCD MONITOR POWER BUTTON

- Turns the LCD Monitor Power ON/OFF.

NOTE:

The system will continue to record when the LCD Monitor is powered off.

SPEAKER

- Provides sound with Left and Right speakers.

Summary of Contents for L15LD400 series




























































Search results

Summary of Contents for L15LD400 series

Reviews:

Related manuals for L15LD400 series

Brands by name

Popular brands

Lorex L15LD400 series, Instruction Manual

Search results

Summary of Contents for L15LD400 series

Reviews:

Related manuals for L15LD400 series

Brands by name

Popular brands