LORCH M-Pro Performance M 200 CuSi, Operation Manual

Page: 57 / 340

Menu structure
- 57 - 10.13
Main menu Level 1 Level 2 Note
Sprache/
language Deutsch
Select menu language.
English
...
Characteristics Manual
All settings can be performed independ
-
antly from a characteristic line.
SG2/3 0,8mm 82/18 Depending on type of model are various
characteristics set in the manu (material-
gas-wire combination).
...
Display Mode
Current and Voltage
Different display settings can be se
-
lected.
Welding voltage
Welding current
Tiptronic
see chapter „Tiptronic” page
51
Options
Characterist. type
EU
Display in accordance to EU (european)
classification.
AWS Display in accordance to AWS (American
Weld¬ing Society) classification.
Interval-Welding On Off
To switch interval welding on/off.
Spot Welding On Off
To switch spot welding on/off.
Factory Settings ... reset?
No Yes
Master reset to reset all settings back to
factory settings.
Delete All Jobs?
No Yes
To delete all jobs.
Diagnosis
Firmware Version Displays Firmware Version.
Serial Number Displays serial no.
Configuration Displays machine configuration.
Operating Hour Coun-
ter
Displays welding time in hours and min
-
utes.
Op. voltages 60/24V
Displays voltages in Volt..
Transf. Temperature Displays temperature in °C..
Main menu Level 1
Factory
settings
Range Note
Parameters Spot welding time
1,0 s 0,1...10,0 s
Only available in spot
welding mode.
Interval time-Welding
1,0 s 0,1...10,0 s
Only available in interval
mode.
Interval time-Wait
0,2 s 0,1...1,0 s
Gas pre-flow
0,1 s 0,0...10,0 s
Wire creep speed
2,0 m/min 1,0...15,0 m/min
Wire burnback time
100 % 0...300 %
Gas post-flow
0,5 s 0,1...20,0 s