SECTION 4. DISASSEMBLY AND SERVICE
- 45 -
REAR HOUSING
ROTOR
DISASSEMBLY:
Install the appropriate rotor puller (special tool), hold the
flywheel and torque the puller to 6.9 Kg-cm (50 ft-lb).
To avoid damaging the rotor, place a wooden
block and a shop rag under the rotor for support.
NOTE:
If torquing the rotor puller does not free the rotor from the
crankshaft, tap the end of the puller with a brass hammer to
help loosen the rotor.
To prevent eye injury, always wear safety
glasses or goggles when striking the end of the rotor puller.
STATOR
STATOR COVER
GENERATOR
COOLING FAN
GENERATOR END COVER
AC OUTPUT TERMINAL
AVR ASSY
BRUSH HOLDER ASSY
REAR HOUSING
