SECTION 4. DISASSEMBLY AND SERVICE
- 44 -
4-5-3 Generator
a. DISASSEMBLLY/ REASSEMBLY
REASSEMBLY:
Wipe dirt or oil off the tapered
portion of the rotor and
crankshaft before installing.
GENERATOR ASSY
REASSEMBLY:
Check to be sure the grommet
is inserted securely.
CRANKCASE GROMMET
REASSEMBLY:
43-47 N·m (430-470 kg·cm,
31.0-33.9 ft·lb)
ROTOR BOLT
DISASSEMBLY:
Remove the brush holder
before the rotor and stator.
BRUSH HOLDER ASSY
REASSEMBLY:
Tighten in crisscross pattern
in 2-3 steps.
After tightening, make sure
there is no clearance
between the crankcase
cover and stator cover.
8-12 N·m (80-120 kg·cm,
5.8-8.7 ft·lb)
STATOR BOLT
REASSEMBLY:
Insert the alignment tabs onto the holes.
Make sure the rubber is not chipped, hard or worn.
Note the installation direction.
RUBBER MOUNT
