SECTION 4. DISASSEMBLY AND SERVICE
- 37 -
4-4-4 Recoil Starter / Fan Cover
a.DISASSEMBLY/ ASSEMBLY
FLANGE NUT 16mm
REASSEMBLY:
Install by aligning the three lugs on the rear
side of the fan with the small hole in the
flywheel.
When disassembling and assembling, take
care not to damage the fan blades.
COOLING FAN
RECOIL STARTER ASSY
REASSEMBLY:
Install with the starter grip position
as shown.
DISASSEMBLY/ REASSEMBLY:
Remove and install with the recoil
starter ASSY.
FAN COVER
DISASSEMBLY/ REASSEMBLY:
Hold the flywheel by placing a
screwdriver into the pulley.
STARTER PULLEY
REASSEMBLY:
Install by aligning the hole in the
pulley with the lug on the cooling
fan.
