Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
24
Advanced Configuration Settings
Select
Advanced Settings
for additional configuration settings. These settings decide how
some of the elements are displayed on the unit's own display and set certain options
specific to the UTREL30-WiFi.
Figure 2:
UTREL30-WiFi advanced configuration screen in LogTag
®
Analyzer 3
These parameters influence what appears on the display:
l
Pausing alarm/statistics processing (see
l
Switching off the display after 30 seconds (Power save, see
)
l
Allowing a user to reset the trip's minimum and maximum values on the display
during recording
(see Clearing the Min/Max Values on page 56)
Following parameters influence specific behavior of the UTREL30-WiFi:
l
Clearing and resetting alarms when the
START
/CLEAR/STOP
button is pressed
l
Leaving the alarm turned on, even if readings return to the normal temperature
range again
l
Allowing the user to stop the logger with the
START
/CLEAR/STOP
button
l
Allowing the user to reset the logger with the
START
/CLEAR/STOP
button
l
Enabling the buzzer for the audible alarm
For detailed information about each parameter please read the section about
Configuring a
LogTag
®
for logging
in LogTag
®
Analyzer’s User Guide or press F1 for help.
Wireless and Network Connection Settings
The UTREL30-WiFi's wireless connection parameters are set up on the
WiFi Settings
tab.
The wireless network has already been set up on this device
Select
Leave wireless settings unchanged
if you are only changing the logging
parameters, but want the UTREL30-WiFi to connect to the same network as before.
www.
GlobalTestSupply
.com
Find Quality Products Online at: