45
User manual OUTCHAIR
09/2018
10. Care and maintenance
10.1. General recommendation
Note
Only Logo Silver spare parts can be used. Failure to comply with this condition results in the loss of warranty rights.
If you encounter problems during maintenance, consult Logo Silver or your dealer.
The Out Chair should be checked once a year by qualified staff approved by Logo Silver.
If you notice symptoms such as a noisy motor, a frayed wiring harness, damaged connectors, uneven tyre wear, unusual movement, a
broken part or any other troubling signs between two maintenance periods, please contact your Logo Silver dealer immediately.
Avoid exposing your electric wheelchair to moisture (rain, snow, fog, salt water or cleaning products). Such exposure could damage your
chair - see section 10.2. Protection against corrosion. If your electric wheelchair comes into contact with water, sponge it as well as
possible with a cloth and let it dry for 10 to 12 hours in a warm room. Check that the joystick and brakes are working properly before
using the wheelchair. If you have any doubts or notice any malfunction in your chair, please contact your Silver Logo dealer.
Do not leave the wheelchair exposed to rain or the elements. Do not use the wheelchair in the shower and do not leave it in a wet
bathroom while you take a shower.
Do not store the wheelchair outdoors or in a moist environment.
Direct exposure to rain or moisture will cause electrical and mechanical malfunctions and risks rusting the chair prematurely.
Avoid hitting the controller, especially the joystick.
Clean the controller regularly.
Avoid exposure to extreme temperatures.
Place the controller cable so that it cannot get caught in the seat frame or base of the electric wheelchair.
Do not charge the chair under extreme temperatures.
