28
User manual
3 - Barre de base
•
Profile name: Displays the profile name selected.
•
Engine Temperature: This symbol means your control system has reduced engine power to protect against
heat damage.
•
Control System Temperature: This symbol means your control system has reduced its own power to protect
against heat damage.
Mode screens:
•
Action Mode: Displays the sections of the chair selected for movement.
•
Bluetooth mode: When Bluetooth mode is enabled, the following screen is displayed.
•
Message Window: The R-net Control System displays warning icons and informational
messages in an allocated message window.
•
Restart: When the control system requires a restart, this symbol flashes..
• Timer: This symbol appears when the control system is moving from one state to another.
• Standby: This symbol will be displayed for a short time before the R-net goes on standby.
•
Checkmark: Process performed correctly (check mark).
•
Cross: Process not performed correctly (cross mark).
•
E-stop : E-stop: If you have an external profile switch and you turn it on while operating your chair or an
actuator, the action will stop, and this symbol will be displayed.
•
Displaced joystick: If you manipulate the joystick before or just after turning on the control system, the
displaced joystick icon will flash on the screen. If you do not return the joystick to the central position within
five seconds, your chair will not move. Turn off the control system and turn it back on to reset it.
• Locked control system: The control system can be locked using a sequence of joystick movements or
with a physical key. See «Locking the Control System» for a detailed description of the locking and unlocking
procedures.
•
Diagnostics Screen: When the safety circuit begins preventing wheelchair movement, the diagnostic
screen is displayed.
7.8.7.3. Basic programming and configuration
• Basic programming can be performed by simultaneously pressing and holding the increase / decrease buttons.
This will take you to the Settings menu :
