43
User manual OUTCHAIR
09/2018
8.5. Batteries
With the Out Chair S (short) there are two battery options:
• 2 x 80 Ah gel batteries or 30 km of driving autonomy
• 2 x 110 Ah gel batteries or 40 km of driving autonomy
With the Out Chair L (longer by 10 cm) there are 2 x 135 Ah gel batteries for 50 km of driving autonomy.
8.6. Recaro Seat
This high-end seat is available in the manual and electric version.
The manual version has backrest and lumbar tilt adjustment via knobs on the sides of the backrest.
The electric version has a power backrest tilt adjustment that can be controlled via the joystick by pressing the mode button
and selecting the “backrest tilt” mode.
8.7. Other optional elements
The other options or adjustments will be added to this notice as a related addendum in this chapter.
9. Malfunction and troubleshooting
9.1. Diagnosis and troubleshooting
Electronic repairs should only be carried out by authorized service providers. Improper or incorrect repair can result in an
unsafe adjustment to the wheelchair. Logo Silver accepts no responsibility or losses or damages of any kind that could result
from any improper or incorrect repair carried out.
The electronic system can detect any unusual circumstances concerning motors, brakes, wiring or the electronics module itself.
The security code number is indicated by a flashing error message with this code.
Depending on the severity, the system may allow or prohibit driving. In some cases, driving is only possible at reduced speed.
Display of safety circuit codes:
When the safety circuit begins to prevent wheelchair movement, a diagnostic screen will appear, or an LED will flash.
Penny and Giles have a full website to help you recover the security codes. If you have access to a computer, this can help you
identify simple problems yourself.
http://support.pgdt.com/Online-Diagnostics/Trip-Codes/R-net-Trip-Code-Database.aspx
Contact your Logo Silver provider and give them the information that is displayed on the diagnostic screen. This will help
determine how to solve the problem.
In addition, the following should be verified if possible:
• Turn off the joystick
• Make sure all connectors are securely connected and no wires are stuck
• Check that the engine brake is engaged
• urn on the joystick and try driving the wheelchair again. If the security circuit launches again, switch off the chair and do not
try use it again.
No security code displayed:
If the wheelchair cannot move or if it moves at a reduced speed while no security code is displayed on the screen, it is likely
that one of the lock switches has been activated for your safety.
Lock switches include; the seat inclination, the reclining backrest, the caster release.
The activation of one of these switches affects the driving performance of the chair. Return the seat to its upright position, make
sure that the seat incline is horizontal, retract the casters and check that the problem is resolved.
