32
User manual
Main area, drive screen:
• Current profile: The selected profile is displayed in digital format.
•
Speed display: Gives a display proportional to the speed of the wheelchair.
•
Maximum speed indicator: Displays the current maximum speed setting.
•
Digital Speed Display: Displays the actual speed of your electric wheelchair.
•
Odometer: Displays the total distance travelled by the chair, or the distance travelled since the last reset.
•
Inhibition: If the chair speed is limited (for example, by an elevated seat), the orange symbol will be
displayed. If the wheelchair drive is inhibited (for example, when using the transfer tilt), the symbol will flash red.
•
Lock: This symbol appears if the control system is lock.
• Seat settings screen: Displays the part of the chair selected for adjustment, and a direction arrow.
Move the joystick to the left or right to select the desired adjustment axis.
Move the joystick forwards or backwards to move the seat
Bluetooth mode setting screens:
• Bluetooth mode: When Bluetooth mode is enabled, one of the following screens appears
General information symbols:
•
Limp: This message is displayed if a user switch has been disconnected and the control system is
programmed to continue to allow slow speed operation.
•
Restart: When the control system requires a restart, this symbol flashes.
•
Timer: This symbol appears when the control system is moving from one state to another.
•
Standby: This symbol will be displayed for a short time before the R-net goes to sleep.
•
Process performed correctly.
•
Process performed incorrectly.
• E-stop (emergency stop): If you have an external profile switch and turn it on while operating your chair or
an actuator, the action will stop and this symbol will be displayed.
•
Displaced joystick: If you move the joystick before or just after turning on the control system, the displaced
joystick icon will flash on the screen. If you do not return the joystick to the central position within five
seconds, your chair will not move. Turn off the control system and turn it back on to reset it.
•
Locked control system: The control system can be locked using a sequence of joystick movements or with a
physical key.
•
See «Lo
cking the Control System» for a detailed description of locking and unlocking procedures.
•
Diagnostics: When the safety circuit begins preventing wheelchair movement, the diagnostic screen is
displayed.
