Logik LCDCRDB10 Instruction Manual Download Page 25

Page: 25 / 28

GB-25

Saf

nings

oduc

t O

ver

view

Connec

tions

ain

tenanc

Oper

ation

and

Tips

and

Specifica

tion

Batteries
• Batteries used in the remote control for this

unit are easily swallowed by young children

and this is dangerous.

• Keep loose batteries away from young

children and make sure that the battery

holder tray is secure in the remote control.

Seek medical advice if you believe a cell

has been swallowed.

• Please dispose of batteries correctly by

following the guidance in this manual.

Supervision
• Children should be supervised to ensure

that they do not play with the unit and the

remote control.

• Never let anyone especially children push

anything into the holes, slots or any other

openings in the case - this could result in a

fatal electric shock.

Class 1 Laser Product
• This unit utilises a

laser. Use of controls,

adjustments or

performance of

procedures other than those specified

herein may result in hazardous radiation

exposure.

• Before moving the unit, ensure the disc

tray is empty.

• Always remove the disc when the unit is

not in use.

• Failure to do so will risk severely damaging

the disc and the unit.

• Do not stack devices, heat from other

devices may affect the performance of the

unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

unit’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing)

instructions in the manual

accompanying the unit.

Service
• To reduce the risk of electric shock, do not

remove screws. The unit does not contain

any user-serviceable parts. Please leave all

maintenance work to qualified personnel.

• Do not open any fixed covers as this may

expose dangerous voltages.

Maintenance
• Ensure to unplug the unit from the mains

socket before cleaning.

• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may

damage the unit’s surface.

• Do not use liquids to clean the unit.

CLASS 1

LASER PRODUCT

Logik LCDCRDB10_IB_100811_Zell.indd 25

11/08/2010 5:06 PM

Summary of Contents for LCDCRDB10





























Search results

Summary of Contents for LCDCRDB10

Reviews:

Related manuals for LCDCRDB10

Brands by name

Popular brands

Logik LCDCRDB10, Instruction Manual

Search results

Summary of Contents for LCDCRDB10

Reviews:

Related manuals for LCDCRDB10

Brands by name

Popular brands