USB AND FIREWIRE PORTS
Logicube SuperSonix User’s Manual
67
computer you are connecting with. For example, choices 0
through 4 may work with HP computers. Different computers will
require different methods of loading. You may have to try all the
choices to find the best solution for your computer.
10. When the proper boot choice is selected, the
boot disk will automatically create a
Ramdrive. The Ramdrive will come up as
the last drive letter, (or C: if the hard drive is
formatted with a non – FAT partition). You
should see a screen that shows:
Welcome to Logicube Solitaire Turbo USB Client!
Version 1.32, Build Jul 31 2006 10:25:52
© Copyright 1999-2003 by Logicube, Inc.
All rights reserved.
Disassembly or decompilation prohibited.
Please make sure that the Loigicube USB Cloning Adapter
is powered and ready!
Press any key to continue..
NOTE:
If the boot process hangs and you do not see the
message above, reboot the computer and try one of the
other choices seen in step 9.
11. Press any key to continue. The Solitaire
Turbo USB Client software should load and
the Solitaire Turbo USB Client screen
should appear.
NOTE:
The USB port you are using must be enabled.
There are some computers or specialized devices that
have the USB ports disconnected or disabled. If the
computer and CD-ROM configuration cannot detect the
USB connection, the following message will appear:
BIOS reports NO USB Drive is present!
The USB Drive is not connected!
Please re-check the USB connection and the Logicube USB Adapter!
Press the Escape key to exit or any other key to retry
At this point, you can try a different USB port, or
even one of the other different choices from the CD-
ROM (as seen in step 9).
NOTE:
It is possible that none of the 10 pre-
configured boot options on the CD will work due to
the computer requiring a different boot
configuration. When none of the 10 pre-configured
boot options work, the hard drive inside the
computer will need to be removed and attached
directly to the SuperSonix.
