Logicube SuperSonix User Manual Download

Page: 9 / 91

GETTING STARTED

Logicube SuperSonix User’s Manual

•

Two UDMA cables (5” and 9”) for connecting
the Master and Target drives to the Logicube
SuperSonix.

•

One extra 5” UDMA test cable in a sealed bag.

•

NOTE

: Please do not remove the test cable

from the sealed bag unless requested to do so
by a Logicube Technical Support
representative.

•

Two PC-style accessory power cables (one 5”
and one 9”) for connecting the Master and
Target drives to the SuperSonix.

•

Two SATA cables, one short and one long, for
attaching SATA drives to your Logicube
SuperSonix.

•

One FireWire cable and one USB cable

•

A System CompactFlash card for software
updates

•

Two CDs containing:

•

A backup copy of the software that is already
pre-installed on the Logicube SuperSonix and
an electronic copy of this manual.

•

A CD boot disk that contains the USB Cloning
software for copying drives through a
computers USB port.

•

A screwdriver and Mag-Lite® flashlight for
opening and looking inside a PC.

•

A vacuum-formed carrying case.

•

NOTE

: It is recommended that you always use

the carrying case to store and carry the
Logicube SuperSonix.

Summary of Contents for SuperSonix




























































































Search results

Summary of Contents for SuperSonix

Reviews:

Related manuals for SuperSonix

Brands by name

Popular brands

Logicube SuperSonix, User Manual

Search results

Summary of Contents for SuperSonix

Reviews:

Related manuals for SuperSonix

Brands by name

Popular brands