OMNIDIAGNOSTICS
50
Logicube SuperSonix User’s Manual
Repair Target Mode Step-by-Step
1. From within the Settings menu tap
the
Diagnostics icon.
2. Locate and tap
the Repair Target icon..
3. A message will appear stating that
Continuing will OVERWRITE portions of
your Drive. Followed by the question: Are
you sure? If you are prepared to continue,
choose “<Yes>”. If you wish to abort the
operation, choose “<No>”.
4. If “<Yes>” is chosen, the Repair Target
operation will begin and a status screen will
appear.
5. When finished, the Logicube SuperSonix will
notify you and provide a summary
containing the number of Bad Sectors,
Weak Sectors, Weak Spots, Repaired and
Unrepaired sectors.
6. After reviewing the summary, tap the Back
icon to return to the main menu.
WipeClean™ Target Mode
The WipeClean Target mode erases all data on the
Target drive. This may be required when discarding
drives that contain sensitive information to which
you do not want others to have access, e.g.
financial information, trade secrets, etc.
WipeClean writes a pattern over the whole Target
drive
2 X n+1
times, where n is the selected
number of iterations of all 0’s and all 1’s. The last
pass then writes random values to every byte of the
drive.
Use
the Passes icon to enter the desired
value for n.
For example, if you set the number of iterations (the
value of n in the above formula) to 1 through the
use of the Passes icon XXXX, WipeClean will
perform a total of three passes, first writing all 0’s
then again writing all 1’s. Then one more pass will
be made this time writing random values.
