CLONING MODES AND SETTINGS
Logicube SuperSonix User’s Manual
33
•
FAT16
•
FAT32
•
NTFS
•
CQ - Compaq partition
•
?? - Unknown partition
5. Select only one partition to clone at a time in
Master Manager mode. Make your selection
by touching the partitions’ info bar within the
partition list. Repeated taps will cause the
clone method to toggle between the different
methods available. Depending on the file
type your choices may be: (CleverCopy,
Defragment, Mirror, and Keep Same).
NOTE
: Refer to the Copy Methods section
of this chapter for more information.
6. Tap the OK icon. After a few seconds the
Logicube SuperSonix will display a list of all
Master partitions (if any) that are large
enough to hold the data to be cloned from
the Target drive.
NOTE
: Existing Master drive partitions that
are too small to hold the amount of data
selected from the Target drive will not
appear on the LCD display. Choose the
Master partition you wish to overwrite, or
scroll down and select the “Add New
Partition” option.
7. Tap the OK icon when you are ready to
begin cloning.
8. The status screen will appear and cloning
will begin.
9. The Logicube SuperSonix will notify you
when cloning has been completed. Tap the
Back icon to return to the main menu.
Repeat the process one partition at a time
until the new Master Manager drive contains
all of the partitions you require.
10. With the alphanumeric keypad, you can
change the name or label of a chosen
partition. Within the cloning menu tap the
Change Volume Label icon
select
Master Drive, select the partition you wish to
name, then tap OK. The alphanumeric
keypad screen will appear. Enter the new
label (you can toggle between lower case,
upper case and numeric screens by tapping
ALT) and then tap OK.
