UPDATING THE SOFTWARE AND FIRMWARE
Logicube SCSI-
NG User’s Manual
59
6.3 Firmware Loading Instructions
SCSI-NG software releases may contain a firmware update. This section provides instructions on how to
check if a firmware update is required, and how to perform the firmware update.
1.
After the software is updated/reinstalled on the SCSI-NG, locate and tap the
Software Updates
icon on the left side.
2.
Tap the “Firmware Update” tab. One of two screens will appear:
a.
FIRMWARE UPGRADE AVAILABLE
–
Tap the
Update
icon. A message will appear:
“FIRMWARE UPDATE COULD TAKE UP TO A FEW MINUTES TO COMPLETE; PLEASE DO
NOT INTERRUPT POWER DURING THIS TIME. ON COMPLETION THE UNIT WILL AUTO-
RESTART AND CONFIRM THE UPDATE.” Tap the
OK
icon to start the firmware update
process.
When the
OK
icon is tapped, the screen may appear to do
nothing. Do not keep tapping the
OK
icon. The firmware update
typically takes no more than 60-120 seconds. When the
firmware update finishes, the SCSI-NG will reboot automatically.
b.
FIRMWARE UPGRADE NOT AVAILABLE –
This message will appear if the device does not
require a firmware update. No further action is necessary if this message appears.
Summary of Contents for SCSI-NG
Page 12: ......
