Logicube SCSI-NG, User Manual

Page: 49 / 74

TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
41

Scan the QR code from a mobile phone or tablet that has internet access.

Through a web browser, when using the web interface (see Section 7.1 for more
information on the web interface), click the QR code.

From the touch screen (if the unit is connected to a network with Internet access),
simply tap the QR code.
To access the Help tab in the System Settings screen, tap the right navigation arrow below the
SCSI-NG logo (located on the top-right of the screen):
5.6 Manage Repositories
This screen allows the user to set up repositories over a network. For example,
repositories can be network shared folders. Once configured, networked repositories
can be used to clone drive images created by the SCSI-NG using the
Drive to Image
mode of cloning. Images created by the SCSI-NG to networked repositories can also be
cloned to a drive using the Image to Drive mode of cloning.
Networks are configured differently and may require
the assistance of a Network or Systems Administrator
to ensure proper configuration for sharing.
When Manage Repositories is selected, two tabs are available at the top of the screen:

Add/Remove – Adds a repository using using the SMB, CIFS, or NFS protocol.

iSCSI – Adds a repository using the iSCSI (Internet Small Computer System Interface) protocol.
5.6.1 Add/Remove
A list of repositories will be shown. The user has the option of adding or deleting a repository.
This will include all connected drives and any networked repository.
If a repository location shows (NOT MOUNTED) , it is
because the drive attached is not formatted by the unit or
the unit cannot connect to the shared network resource.