Logicube SCSI-NG, User Manual

Page: 44 / 74

TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
36
5.3.2.2.1 Mode
Selecting Mode will open the Wipe Mode screen showing the following options:

NONE – Choosing this will instruct the unit not to perform a wipe using
Wipe Mode.

DOD – Choosing this will instruct the unit to perform a 7-pass wipe
conforming to the DoD M-5220.22M standards.

CUSTOM – Choosing this will allow the user to specify how many wipe
passes will be performed and what values each pass will be written on
each of the passes selected.
5.3.2.2.2 HPA/DCO/ACS3
The HPA/DCO/ACS3 button will open the HPA/DCO/ACS3 option for wiping. If
the drive to be wiped has HPA, DCO and/or ACS3 that needs to be wiped, select
Yes for the corresponding option.
5.3.2.2.3 LBA
By default, this is set to 100% which will wipe all Logical Block Addresses (LBAs)
and will wipe the entire drive (100%). The LBA count can be adjusted by tapping
the
edit icon.
5.3.2.2.4 PASSES
This Wipe Setting will change depending on the Wipe Pattern Mode selected.

If None was selected, Passes is not selectable.

If DoD was selected, all 7 passes will be pre-filled. Users can edit the
pass values by tapping the edit icon. The default values are: 00, 01, 00,
FF, F6, 00, XX (random).

If Custom was selected, one pass will be pre-filled with a specified value.
Users can edit the pass values if desired by tapping the edit icon. The
default value for a custom pass is 00.