Logicube SCSI-NG, User Manual

Page: 30 / 74

CLONING
Logicube SCSI-
NG User’s Manual
22
4.0.3 Clever Copy Limitations
Clever Copy method copies only data sectors and fills the rest of the drives with zeroes (blank
space) and can expand partitions to fill the rest of the drive or a percentage of the drive. If one
of the partitions (file systems) is not supported by Clever Copy, the Logicube device will
automatically use Mirror Copy for that partition. Here are some limitations when using the
Clever Copy method:

For Windows, all System Restore, Recovery, and OEM partitions should not be
expanded.

The Target drives should be the same capacity or larger. If the Target drive is smaller in
capacity, please see
Section 4.0.1 .
4.1 Mode
Tap this icon to choose between the following three imaging modes:

Drive to Drive – Clones one Master drive to one Target drive.

Image to Drive – Restores SCSI-NG image files to one drive.

Drive to Image – Creates an image file from the Master drive. The image file can be written to a
connected drive or a network repository.
4.2 Master/Image File
Tap this icon to select the Master drive to be imaged. SCSI-NG will list the drive connected to the Master
position.
When Image to Drive mode is selected, the Image File window will list all available drives that may
contain SCSI-NG image files.
The (More Info) icon displays more information
on the drive. The drive details window will appear
showing information about the drive.
4.3 Settings
Tap the Settings icon to change the image settings. Depending on the selected mode, different screens
will appear.

Job Info – Available in all modes (See Section 4.3.1 ).

HPA/DCO/ACS3 – Available in the following modes (See Section 4.3.2 ) :

Drive to Drive

Drive to Image

Error Handling – Available in all modes (See Section 4.3.3 ).