Logicube OmniClone® Xi User’s Manual
71
12. Combo Station
Introduction
The Logicube Combo Station is designed to attach
directly to your OmniClone Xi HDD Duplication
device. It features multiple connectors that allow a
variety of different media to be cloned without the
need for special adapters. The following media are
directly supported by the Combo Drive.
2.5” notebook (laptop) drives
1.8” drives
PCMCIA (CardBUS) drives
Compact Flash (CF) drives
How to Install
1. Turn off the power to the OmniClone Xi and unplug
the power supply cord.
2. Remove the drive and any cables from the Standard
Drive Station.
3. Loosen the two thumb-screws located on either side
of the Drive Station.
4. Pull straight up on the thumb-screws, the Drive
Station should come right out.
5. Insert the Combo Station into the now-empty slot.
Make sure that the IDE-style connector on the
bottom of the Combo Station lines up with the socket
inside the OmniClone Xi unit.
6. Tighten the two thumb-screws on either side of the
Combo Station.
7. Repeat Steps 1
– 6 for any other Combo Stations
that need to be installed.
