THE SERIAL LINK OPTION
Logicube OmniClone® Xi User’s Manual
55
unit and name them “OCXI_02”,”OCXI_03”,
etc.
Serial Link Commands
The Serial Link commands are as follows:
?
–
Displays a list of all supported commands.
I
–
Displays information about the unit like serial
number, software version, etc.
C
–
START/STOP button. Press C twice to start a
cloning session and once more during the session
to abort.
S
–
Set button. Accesses the Setup menu.
B
–
Back Button. Acts like the Back icon on the unit.
M
–
Forces the unit to use 100% MirrorCopy mode
with no Verification.
V
–
Sets Verify to 100% (All). Pressing M sets it
back to None.
Nxxx
–
Sets the percentage of the MirrorCopy to a
number between 000 and 100%. For Example:
010 = 10% from front of Master
042 = 42% from front of Master
003 = 3% from front of Master
T
–
Provides current status of the cloning session:
READY
,
BUSY
or
DONE.
P
–
Shows progress information of a cloning
session (speed, percentage complete, etc.). This is
only useful when the unit is
BUSY
.
R
–
Provides a printed report at the end of the
session. It only works when the status of the cloning
session is
DONE
. Printed report is similar to the
report generated by the Database option (see
Section 6
– Database Option for more details).
U
–
Sets the unit to USB mode so that the Compact
Flash (CF) drive is accessible through Windows.
This is only useable when the unit is not cloning.
NOTE:
Starting a cloning session will automatically
turn off USB mode.
O
–
Turn USB mode OFF and disconnect CF drive
from Windows (without starting a cloning session).
