CLONING MODES AND SETTINGS
Logicube OmniClone® Xi User’s Manual
19
Figure 3a: Selective Copy Modes
CleverCopy
Use the CleverCopy
algorithm for this
partition
Mirror
Simple partition
mirror (no
adjustments)
Keep Size
Special mode for
cloning certain
Windows Vista
partitions.
Defragment
Defragment this
partition on-the-fly
(FAT16/32 only)
None
Do not copy this
partition
MirrorCopy Mode
This cloning mode makes a direct, physical (bit-by-
bit) copy of the Master drive. It does not adjust any
values or perform any translation from drive to
drive. It simply copies whatever percentage of the
Master drive that is designated.
NOTE
: Any space left over on the Target drive will
be seen as unallocated space. For example, if you
are performing a 100% Mirror copy of a 40 GB drive
to an 80 GB drive, the remaining 40 GB of space
will be unallocated space.
NOTE
: Drives in a RAID array have dynamic or
striped partitions and also need to be Mirror copied.
When cloning a multiple drive RAID array, each
drive in the array needs to be Mirror copied to an
identical Target drive.
You can change the percentage of Master disk you
wish to mirror. For example, setting the percentage
to 50% will mirror the first 50% of the Master drive’s
size.
MirrorCopy Step-by-Step
1. From anywhere in the menu system press
the “
Set
” button to enter the Settings menu.
