Logicube SuperSonix
®
-
NG User’s Manual
14
3: Quick Start
3.0 Quick Start Guide
This chapter gives a basic overview and steps on how to perform different types of operations using the
SuperSonix-NG (Clone, Hash, Wipe, etc.). Complete details on each operation, menu, or selection, and the
different screens can be found in
and
The unit can perform up to five (5) tasks per mode of operation (specifically Clone, Hash, and/or Wipe).
It is highly recommended to change the passwords for built-in
accounts. Instructions on how to change the passwords to the
two built-in user accounts can be found in
There are software options available such as:
-
Support for SAS (Serial Attached SCSI) drives
-
Verify functionality
-
FireWire support
-
Networking Support
To verify if these options are enabled on the unit, tap the
Statistics
icon
from the navigation menu and select the
Options
tab.
To purchase any of these options, contact the Logicube Sales Department
at
3.0.1 ATA Security Locked Drives
With SuperSonix-NG Software version 2.1 (and newer), drives that are locked with the
ATA security standard can be temporarily unlocked. The password used to lock the drive
is required to unlock the drive.
Drives that are locked with the ATA security standard will show a locked icon in the
LOCKED
column when selecting drives (Master or Target).
When the drive is locked, the contents of the drive are not accessible. Locked drives
cannot be cloned (as Master or Target), hashed, or wiped without first being unlocked.
