TYPES OF OPERATIONS
Logicube SuperSonix-
NG™ User’s Manual
66
response showing “Command (DbManagement)
Successful”.
6.
Type
db list
again and there should be an
asterisk (*) on initial.db.
7.
Turn the unit off using the power button, then
close the Telnet/SSH application.
8.
Turn the unit on. When the unit boots up, it will
load the default configuration (INITIAL.DB).
5.8.2.2 User Account Passwords
This unit comes with two built-in user accounts:
•
logicube
•
it
Both user account passwords can be changed in this screen. To change
the password for either account, tap either the
LOGICUBE
or
IT
button. A
screen will appear:
1.
Enter the current password.
The default password for each account is:
LOGICUBE:
logicube
IT:
it
2.
Enter a new password.
3.
Enter the new password again in
the ‘confirm password’ box.
4.
Tap the
OK
icon when finished.
The
User Account Passwords
do not need
to be saved
into a user profile. Changing any of these two passwords
will take effect immediately. If the new User Account
password is forgotten, contact Tech Support assistance.
