TYPES OF OPERATIONS
Logicube SuperSonix-
NG™ User’s Manual
62
2.
Go to the
Clone
screen and set the
Mode
to ‘Image to Drive’.
3.
In the
System Settings
, go to
Profiles
and tap the
New
icon.
4.
Type a name for this profile. For example, ImageToDrive and tap the
OK
icon. The
profile name should appear on the screen.
5.
Tap the newly saved profile and tap
Save
. A confirmation screen will appear.
6.
Tap the
Yes
icon to save the profile.
7.
Make sure the profile to be loaded (during the boot process) is highlighted (for
example ImageToDrive.DB) and tap the
Load
icon. A confirmation screen will
appear.
8.
The next time the unit is turned on it will load ImageToDrive profile.
To delete a profile, highlight the profile to be deleted then tap the delete icon. A
confirmation screen will appear. Tap the
Yes
icon to delete the selected profile.
When loading a profile, the it may take several seconds
to completely load the different configurations.
5.8.2 Passwords
There are six keys or passwords that can be set or changed.
•
Key: Log File Deletion
–
A key can be set as an extra layer of protection when
deleting log files. If this key is set, a key prompt will appear, and the correct key
must be entered before any log files can be deleted.
•
Key: Local HTTP
–
A key can be set to lock the local touch screen on the unit. If
this key is set, a key prompt will appear, and the correct key must be entered
before allowing access to the local touch screen.
