manualshive.com logo in svg

LOFTNESS GrainLogix GBL12A, Owner'S Manual And Parts Book

The LOFTNESS GrainLogix GBL12A Owner's Manual and Parts Book is essential for maintaining and operating this top-of-the-line grain bagger. You can download the manual for free at manualshive.com, ensuring you have the necessary information at your fingertips to keep your equipment running smoothly.

Share
Download
background image

Grain Bag Loader OM

Maintenance (Cont’d)

Disc Brakes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 59

Removing The Brake Pads And Calipers    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 59
Installing The Calipers And Brake Shoes    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 60
Bleeding The Brake System    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 61

Troubleshooting  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 64

Parts Identification

Base Assembly - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 70
Base Assembly (Cont’d) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 71
Base Assembly (Cont’d) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 72
Base Assembly, Bag Pan and Flap (Cont’d) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 74
Bag Pan Assembly (N27684) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 76
Base Assembly (Cont’d) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 78
Bag Lift Cradle  (N33583) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 80
Bungy Assembly (N37358) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 81
Auger Body Sleeve (N30629) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 82
Crane Assembly (N40131) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83
Beam Winch Trolley Lift Assembly (N27680) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 84
GBL12 Front Frame Assembly - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 86
GBL12 Front Frame Hitch Assembly - GBL12 only    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 87
GBL12 Front Frame Hitch Assembly (Cont’d) - GBL12 only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 88
Front Frame Assembly - GBL12 only    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 92
Split Auger (N29551) - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 93
Front Boot Assembly - GBL12 only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 94
Auger Hanger Mount (N29566) - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 96
Swing Auger Components (N29114) - GBL12 only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 97
Swing Auger Components without Pan (N29230) - GBL12 only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 98
GBL12 Hydraulic Diagram - GBL12 only    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 100
Swing Auger Drive (N27851) - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 101
Swing Auger Drive Assembly (N27532) - GBL12 only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 101
Swing Auger - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 102
Swing Hopper Main Assembly - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 104
Swing Hopper Drive - GBL12 only    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 106
Swing Auger Hopper Lift (N33220) - GBL12 only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 108
GBL12C Front Frame Assembly - GBL12C only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 110
GBL12C Front Frame Hitch Assembly (N30872) - GBL12C only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 111
GBL12C Front Frame Assembly - GBL12C only  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 112
GBL12C Front Frame Assembly (Cont’d) - GBL12C only   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 114
20" Front Auger - GBL12C only    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 116
Hopper with Extension (N30147) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 118
Hopper Hardware (N27322) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 119
Right Transport Axle Wired (N30156) - GBL12 and GBL12C   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 120
Left Transport Axle Wired (N30155) - GBL12 and GBL12C    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 120
Hub Assembly, Traction/Brake Wheel   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 121

Table of Contents

Summary of Contents for GrainLogix GBL12A























































































































































Reviews:

No comments

Related manuals for GrainLogix GBL12A

ACS 3200 Series Operation And Instruction Manual preview
3200 Series
Brand: ACS Pages: 56
GE Vivid E9 Service Manual preview
Vivid E9
Brand: GE Pages: 802
iET SRL Series Operation Manual preview
SRL Series
Brand: iET Pages: 17
Nemalux LS Series Manual preview
LS Series
Brand: Nemalux Pages: 6
OBDLink LX Quick Start Manual preview
LX
Brand: OBDLink Pages: 2
laerdal SimMan 3G Trauma Quick Setup Manual preview
SimMan 3G Trauma
Brand: laerdal Pages: 16
laerdal SimMan 3G Maintenance Manual preview
SimMan 3G
Brand: laerdal Pages: 16
laerdal SimMan Important Product Information preview
SimMan
Brand: laerdal Pages: 60
laerdal Nursing Baby Manual preview
Nursing Baby
Brand: laerdal Pages: 4
laerdal Resusci Anne Simulator Important Product Information preview
Resusci Anne Simulator
Brand: laerdal Pages: 8
laerdal Nursing Baby VitalSim Manual preview
Nursing Baby VitalSim
Brand: laerdal Pages: 15
YASKAWA SI-P3V Technical Manual preview
SI-P3V
Brand: YASKAWA Pages: 40
Yardfully RAISED GARDEN BED Assembly Manual preview
RAISED GARDEN BED
Brand: Yardfully Pages: 2
Cannon MAGNUM 5 Owner'S Manual preview
MAGNUM 5
Brand: Cannon Pages: 70
Sakai 544 Troubleshooting And Diagnostics Information preview
544
Brand: Sakai Pages: 31
SAC SAC-LEAD-LED Installation preview
SAC-LEAD-LED
Brand: SAC Pages: 2
Xalingo 0986.5 Assemble Instruction preview
0986.5
Brand: Xalingo Pages: 2
KaVo INTRA PROPHYwiz 181 P Instructions For Use Manual preview
INTRA PROPHYwiz 181 P
Brand: KaVo Pages: 22

Brands by name

Popular brands

Load more brands