LOFTNESS GrainLogix GBL12A, Owner'S Manual And Parts Book

Page: 33 / 150

25 Grain Bag Loader OM
Set-up Instructions
Initial Set-up (Cont’d)
Swing Hopper Hoist Installation (GBL12
only)
1
Install a lifting chain (1) onto the swing hopper hoist .
1
Move the swing hopper hoist towards the main auger
frame . Align the swing hopper hoist with the mounting
plate and install bolt (1), flat washer (both sides) and nut .
1
Slowly lower the swing hopper hoist until the mounting
holes are aligned .
Install the bolt (1), flat washer (both sides) and nut . Tighten
the two bolts to securely fasten the swing hopper hoist to
the main auger frame .
2
1
Route the two wires (1) from the electric winch to the
control panel (2) . Install the two wires into the control
panel . See “Wiring Diagram (N157277) - GBL12 and
GBL12C” on page 129 for the correct wire locations .