LOFTNESS GrainLogix GBL12A, Owner'S Manual And Parts Book

Page: 39 / 150

31 Grain Bag Loader OM
Set-up Instructions
Initial Set-up (Cont’d)
Main Hopper Assembly (Cont’d)
1
2
3
Place one hopper extension side panel (1) outside the
hopper extension front and back panels (2) .
Install 1/2" x 1-1/4" bolts (3) and secure with 1/2" nuts
(both sides) .
1
Install these three 1/2" x 1-1/4" bolts and secure with
1/2" nuts (1) .
NOTE:
Do not tighten bolts and nuts at this time.
Repeat the previous procedure for the remaining hopper
extension side panel on the opposite end of the hopper .
Tighten all bolts and nuts to securely fasten the hopper
extension panels to the hopper .
Main Hopper Installation
1
1
2
Install chains (1) at the two lift points (2) on the hopper
cross braces .
Raise the hopper slowly, then move the hopper over the
mounting frame .
Align and lower the hopper onto the mounting frame .