LOFTNESS Battle Ax Light, Owner'S Manual And Parts Book

Page: 26 / 60

20 Battle Ax Light - Skid Loader OM
Removing Motor Cover, Manual
Holder Cover, and Hose Cover
DANGER:
Shut down power from the loader
before removing the motor cover, manual
holder cover, and hose cover.
1
2
3
3
3
2
4 4
5
1 1
Remove the 3 bolts (1) on the rear of the motor cover (2)
followed by the three bolts (3) on the front.
Remove the three bolts (4) securing the manual holder
cover (5) to the motor cover.
Carefully lift the cover off of the frame, being cautious not
to pinch or damage the pressure gauge hose under the
motor cover.
Maintenance
Note: 51" model shown.
1 1 1 1
1 1
2
1 1
With the motor cover and manual holder cover removed,
remove the remaining bolts (1) securing the hose cover
(2). Remove the hose cover.
NOTE: The 61" model has one more bolt securing the
hose cover than the 51" model.
NOTE:
The manual holder can be removed for easier
access to the bolt located below the holder.
Loosen and remove the three nuts from the bolts
that secure the manual holder to the cover.
When maintenance/repairs are complete, return the
covers back into position by reversing the procedures
above. Be sure to tighten and secure all bolts.