70
ENG
Warning: the function is not on if you try to
program a null cooking time or the starting
hour is the same as the actual hour. The
programming has to be made by 1 minute,
otherwise the function ends. If the oven is
switched on, it is deactivated at the end of
the configuration.
If you want to continue the cooking, turn the
knob to program the new hour.
Note: With a programmed starting, the
function remains memorized, even if the
power goes away. The oven will switch on
with a delay equal to time for which power
has lacked.
ELECTRONIC PROGRAMMER for cookers with
“gas oven ventilated”
.
How to program time at the first ignition of
the system.
Turn the knob and program hour
and minutes.
Confirm pressing completely the
knob.
How to regulate the hour.
To modify the hour after the first
time, keep pressed the knob
for 3 seconds, and carry out the
previous operation.
Cooking time function.
Turning the knob with the lighted
oven the function “cooking time” is
activated,
the led
blinks and the
remaining time is showed.
When on the display “ END” appears, the oven
switches off and a sound warning is in function.
To come back to the hour press the
knob or put the oven knob in off
position.
Turning it to right a new count is in
function again, if oven switches on
is possible to program a new time
too.
To interrupt the function turn the
knob until 0 or press the knob.
Note: If the knob is pressed twice
consecutively it is possible to regulate the
timer at intervals of 5 minutes. Push once
more to fix the desired time.
ATTENTION: it is forbidden leaving inside the
oven not working something different from
pats.
